beat365在线登录APP-Android App Store




当前位置:首页 »资讯中心 » 新闻资讯 » 不锈钢门套的清洁技巧


来源: 浏览:发表时间:2022-07-13
The performance characteristics of stainless steel resistant to weak corrosive media such as air, steam, water and so on make its products have many advantages in use. For example, compared with solid wood and PVC door jambs, stainless steel door jambs are much easier to clean and maintain, but it is also the same. You should pay attention to regular cleaning in order to be beautiful and practical. Here is its cleaning skills.
1. If there is dirt on the surface of the door pocket, you can use detergent water to wipe its surface. But we should pay attention to whether the material is mirror or wire drawing. If it is mirror, we should pay special attention to the use of cleaning tools, and the rag used to clean the door pocket must be clean and dust-free. In addition, use a special cleaner to clean the door pocket, that is, use a stainless steel cleaner or a care agent. The effect of removing stains is very good, which can restore the brightness of the door pocket.
2. If you want to remove the door trademark and the tape traces of the film, you should use warm water to wipe, and then use alcohol to scrub.
3. If there is bleach or various acids on the surface of the product, wash it with water, and then wipe it with neutral carbonated soda water.
4. If there is rust on the surface of the door pocket, it is necessary to use 10% nitric acid for cleaning. It is also possible to use a special maintenance solution for cleaning. If you paint it with a similar color, it is difficult to see the traces of cleaning.
5. If there are stubborn stains on the surface of the door pocket, you can remove the stains by wiping the radish with detergent. It is forbidden to use steel wire balls, otherwise it will cause great damage to the door pocket.
The above is a detailed introduction about elevator stainless steel edging. I hope it will help you If you have any questions, please contact us We will provide you with professional service